Siemens Sinamics S120 Diagnostic Manual page 932

System reactions
8.1 System reactions to SINUMERIK alarms
Identifier NOREADY | BAGREACTIONVIEW
Effects Mode group ready off: Active fast braking (i.e. with maximum braking current) of the drives in this
mode group, the controller enable of the NC axes involved is deleted.
• Mode group not ready.
Identifier NOREADY
Effects Channel ready off: Active fast braking (i.e. with maximum braking current) of the drives in this channel,
the controller enable of the NC axes involved is deleted.
• Channel not ready.
Identifier NONCSTART
Effects It is not possible to start a program in this channel.
• NC start inhibit in this channel.
Identifier NOREFMARK
Effects The axes in this channel have to be referenced again.
• Re-reference axes in this channel.
Identifier SETVDI
Effects VDI interface signal alarm is set.
• Interface signals are set.
Identifier SHOWALARM
Effects Alarm is displayed on the HMI.
• Alarm display.
Identifier STOPBYALARM
Effects Ramp stop of all channel axes.
• NC stop for alarm.
Identifier STOPATENDBYALARM
Effects Stop at end of block.
• NC Stop for alarm at end of block.
932
Diagnostics Manual, 07/2010, 6FC5398-8BP40-0BA0
Alarms