Block %2: Gwps Has Been Limited; Block %2: Speed Has Been Limited; Block %2: Dresser %4, Gwps Has Been Limited; Block %2: Dresser %4, Speed Has Been Limited - Siemens Sinamics S120 Diagnostic Manual

Hide thumbs Also See for Sinamics S120:

Table of Contents

[Channel %1: ] Block %2: GWPS has been limited

%1 = Channel number

%2 = Block number, label channel number

Definitions:

The alarm can be triggered by the following grinding cycle: CYCLE446

Check limit value for GWPS and program a lower value in the NC program if necessary

Clear alarm with the Delete key or NC START.

Continuation:

[Channel %1: ] Block %2: Speed has been limited

%1 = Channel number

%2 = Block number, label channel number

Definitions:

The alarm can be triggered by the following grinding cycle: CYCLE446

Check limit value for speed and program a lower value in the NC program if necessary

Clear alarm with the Delete key or NC START.

Continuation:

[Channel %1: ] Block %2: Dresser %4, GWPS has been limited

%1 = Channel number

%2 = Block number, label channel number

Definitions:

The alarm can be triggered by the following grinding cycle: CYCLE421

Check limit value for GWPS and program a lower value in the NC program if necessary

Clear alarm with the Delete key or NC START.

Continuation:

[Channel %1: ] Block %2: Dresser %4, speed has been limited

%1 = Channel number

%2 = Block number, label channel number

Definitions:

The alarm can be triggered by the following grinding cycle: CYCLE421

Check limit value for speed and program a lower value in the NC program if necessary

Clear alarm with the Delete key or NC START.

Continuation:

Diagnostics Manual, 07/2010, 6FC5398-8BP40-0BA0

Show Quick Links

Table of Contents

Sinumerik 828d