Toyota Celica 2005 Repair Manual page 1101

DI−900
3 Check airbag sensor assembly.
Spiral
Cable
D Squib
ON
DLC3
CG TC
H01002
AB0119
FI1390
H10600
OK
2005 CELICA (RM1131U)
DIAGNOSTICS
PREPARATION:
(a)
(b)
Airbag
Sensor
CHECK:
Assembly
(a)
→ ←
(b)
(c)
(d)
(e)
DTC B0100/13
OK:
HINT:
Codes other than code B0100/13 may be output at this time, but
they are not relevant to this check.
H10598
− SUPPLEMENTAL RESTRAINT SYSTEM
Connect the connector to the airbag sensor assembly.
Connect the negative (−) terminal cable to the battery,
and wait at least for 2 seconds.
Turn the ignition switch to ON, and wait at least for 10 se-
conds.
Clear the DTC stored in memory (See page DI−884).
Turn the ignition switch to LOCK, and wait at least for 10
seconds.
Turn the ignition switch to ON, and wait at least for 10 se-
conds.
Check the DTC (See page DI−884).
DTC B0100/13 is not output.
NG Replace airbag sensor assembly.
1100