Toyota Celica 2005 Repair Manual page 1100

INSPECTION PROCEDURE
1 Prepare for inspection (See step 1 on page DI−1025).
2 Check D squib wire harness.
Spiral
Cable
D Squib
D−
(−)
H01001
H02142
OK
2005 CELICA (RM1131U)
DIAGNOSTICS
PREPARATION:
Release the airbag activation prevention mechanism built in the
connector on the airbag sensor assembly side between the
Airbag
Sensor
steering wheel pad (D squib) and the airbag sensor assembly
Assembly
(See page DI−884).
CHECK:
Measure the resistance between D+ and D− on the steering
wheel pad (D squib) side between the airbag sensor assembly
D+
and the steering wheel pad (D squib).
OK:
(+)
H02193
− SUPPLEMENTAL RESTRAINT SYSTEM
Resistance: 1 MΩ or Higher
NG Go to step 5.
1099
DI−899