Show Hosts - Dell Networking 2024 Reference Manual

Command Mode
Interface (out-of-band) Configuration mode
User Guidelines
There are no user guidelines for this command.

show hosts

Use the show hosts command in User EXEC mode to display the default
domain name, a list of name server hosts, and the static and cached list of
host names and addresses.
Syntax
hostname
shows hosts [
hostname —(Range: 1–255 characters). The command allows spaces in the
•
host name when specified in double quotes. For example,
console(config)#snmp-server host "host name"
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode, Configuration mode and all Configuration submodes
User Guidelines
This command has no user guidelines.
Example
The following example displays information about IP hosts.
console>show hosts
Host name:
Default domain: gm.com, sales.gm.com, usa.sales.gm.com
Name/address lookup is enabled
Name servers (Preference order): 176.16.1.18 176.16.1.19
Configured host name-to-address mapping:
Host
492
IP Addressing Commands
].
Addresses