Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual page 998

Hide thumbs Also See for OmniSwitch 6250:

Table of Contents

Related Commands

efm-oam multiple-pdu-count

dot3OamTable

dot3OamAdminState

dot3OamOperStatus

dot3OamLoopbackTable

dot3OamLoopbackStatus

Configures the value of multiple PDU count. When multiple PDU

count is set to a specific number in case of any of the threshhold

cross events, the same event notification PDU will be transmitted

that many times towards the peer.

OmniSwitch 6250 CLI Reference Guide

LINK OAM Commands

November 2009