Show Udld Configuration Port - Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual

show udld configuration port

Displays the configuration information for all UDLD ports or for a particular UDLD port on the switch.
show udld configuration port [slot/port]
Syntax Definitions
slot/port
Defaults
By default, a list of all UDLD ports is displayed.
Platforms Supported
OmniSwitch 6250-Metro Models
Usage Guidelines
N/A
Examples
-> show udld configuration port
Slot/Port Admin State
-----------+---------------+------------+-------------+----------------
1/1 disabled
1/2 disabled
1/17 disabled
1/18 disabled
1/19 disabled
1/20 disabled
1/21 disabled
1/22 disabled
1/41 disabled
1/42 enabled
1/43 enabled
1/44 enabled
1/45 enabled
-> show udld configuration port 1/44
Global UDLD Status
Port UDLD Status
Port UDLD State
UDLD Op-Mode
Probe Timer (Sec)
Echo-Wait Timer (sec)
page 27-14
The slot number for the module and the physical port number on that
module (e.g., 3/1 specifies port 1 on slot 3).
Oper Mode Probe-Timer
normal 15
normal 45
normal 33
normal 33
normal 33
aggresive 55
aggresive 55
aggresive 55
aggresive 77
aggresive 77
aggresive 77
aggresive 77
aggresive 77
: enabled,
: enabled,
: bidirectional,
: aggresive,
: 77,
: 8
OmniSwitch 6250 CLI Reference Guide
UDLD Commands
Echo-Wait-Timer
10
10
8
8
8
8
8
8
8
8
8
8
8
November 2009