Parking Lock Pawl Removal And Installation (A340H) - Toyota Hilux Surf 1993 Owner's Manual

Table of Contents

Advertisement

AT–158
AUTOMATIC TRANSMISSION
Parking Lock Pawl
REMOVAL OF PARKING LOCK PAWL
1. REMOVE TRANSFER VALVE BODY
(See page AT–151)
2. REMOVE PARKING LOCK PAWL BRACKET
Remove the two bolts and bracket.
3. REMOVE SPRING, SHAFT AND PARKING LOCK PAWL
Remove the spring, shaft and parking lock pawl.
INSTALLATION OF PARKING LOCK PAWL
1. INSTALL PARKING LOCK PAWL, SHAFT AND SPRING
Install the parking lock pawl, shaft and spring.
2. INSTALL PARKING LOCK PAWL BRACKET
(a) Install two bolts finger tight.
(b) Check that the parking lock pawl operates
(c) Torque the bolts.
Torque: 6.9 N–m (70 kgf–cm, 61 in.¿Ibf)
3. INSTALL TRANSFER VALVE BODY
(See page AT–152)
On–Vehicle Repair
smoothly.

Advertisement

Table of Contents
loading

Table of Contents