MANUAL TRANSMISSION
–
31. INSTALL CLUTCH HOUSING
(a) Install the clutch housing.
(b) Install and torque the nine bolts.
Torque: 37 N–m (375 kgf¿em, 27 ft–lbf)
32. INSTALL VEHICLE SPEED SENSOR
(a) Install the speed sensor.
(b) Install and torque the set bolt.
Torque: 13 N–m (130 kgf–cm, 9 ft–lbf)
33. INSTALL BACK–UP LIGHT SWITCH
(a) Install and torque the back–up light switch.
Torque: 40 N–m (410 kgf–cm, 30 ft–lbf)
(b) Install the wire clamp.
COMPONENT PARTS INSTALLATION
MT2–57