MANUAL TRANSMISSION
–
24. REMOVE SPACER
25. MEASURE COUNTER FIFTH GEAR THRUST CLEAR-
ANCE
Using a feeler gauge, measure the counter 5th gear
thrust clearance.
Standard clearance: 0.10 – 0.35 mm
(0.0039 – 0.0138 in.)
Maximum clearance: 0.40 mm (0.0157 in.)
26. REMOVE GEAR SPLINE PIECE NO.5, SYNCHRONIZER
RING, NEEDLE ROLLER BEARING AND COUNTER
FIFTH
GEAR WITH HUB SLEEVE NO.3
(a) Engage the gear double meshing.
(b) Using a hammer and chisel, loosen the staked part
of the nut.
(c) Remove the lock nut.
(d) Disengage the gear double mesh-
ing.
(e) Using SST, remove the gear spline piece No. 5.
SST 09213–31021
(f) Remove the counter 5th gear with hub sleeve No–3.
Disassembly of Transmission
(Disassembly of Transmission)
MT1–74