Stabilizer Bar Removal - Toyota Hilux Surf 1993 Owner's Manual

SA–162
SUSPENSION AND AXLE –
Stabilizer Bar
(See page SA–153)
REMOVAL OF STABILIZER BAR
1. JACK UP AND SUPPORT VEHICLE
2. DISCONNECT STABILIZER BAR LINK FROM BODY
(a) Disconnect the stabilizer bar link from the body.
(b) Remove the retainers and cushion from the link.
3. REMOVE STABILIZER BAR
(a) Remove the stabilizer bar bracket with cushion from
the rear axle housing.
(b) Remove the stabilizer bar.
4. REMOVE STABILIZER BAR LINK
(a) Remove the retainers and cushion from the link.
(b) Remove the bolt and nut.
(c) Remove the stabilizer bar link from the stabilizer bar.
INSTALLATION OF STABILIZER BAR
(See page SA–153)
1. INSTALL STABILIZER BAR LINK
(a) Install the retainers and cushion to the link.
(b) Connect the link to the stabilizer bar and torque the
bolt and nut.
Torque: 36 N–m (365 kgf–cm, 26 ft–lbf)
Rear Suspension (Stabilizer Bar)