Toyota Hilux Surf 1993 Owner's Manual page 542

SA–42
SUSPENSION AND AXLE –
2. REMOVE DUST DEFLECTOR
Using a screwdriver, pry out the dust deflector from the
steering knuckle.
3. REMOVE STEERING KNUCKLE BUSHING
(a) Using SST, pull out the steering knuckle outside
bushing.
SST 09308–00010
(b) Using a brass bar and hammer, drive out the steer–
ing knuckle inside bushing.
4. INSTALL STEERING KNUCKLE BUSHING
(a) Using SST and a hammer, tap in a new steering
knuckle outside bushing.
SST 09550–10012 (09252–10010, 09555–10010)
HINT: When installing the bushing to the spindle, make
sure the flat portion of the bushing is aligned with the
spindle groove as shown in the figure.
(b) Using SST and a hammer, tap in a new steering
knuckle inside bushing.
SST 09550–10012 (09252–10010, 09555–10010)
Front Axle Hub and Steering Knuckle (Steering Knuckle)