MT1–60
MANUAL TRANSMISSION
–
13. INSTALL SHIFT FORK SHAFT NO. 1 AND SHIFT FORK
NO. 1
(a) Apply MP grease to the interlock pin No. 2 and install
them into the shift fork shaft No. 1.
(b) Using a magnetic finger, install the interlock pin
No–1 to intermediate plate.
(c) Install shift fork shaft No. 1 through the intermediate
plate and shift fork No. 1.
(d) Install the shift fork No. 1 set bolt and torque the
bolt.
Torque: 20 N–m (200 kgf –cm, 14 ft–lbf)
14. INSTALL SHIFT FORK SHAFT NO.3 AND REVERSE
SHIFT FORK
(a) Install the shift arm shoe, shift fork and two E–rings
to reverse shift arm.
(b) Install the reverse shift arm to reverse shift arm
bracket.
(c) Apply MP grease to the interlock pin No. 2 and install
Assembly of Transmission
them into the shift fork shaft No.3.