BRAKE SYSTEM
–
Rear–Wheel Anti–Lock Brake System
4. DISCONNECT POWER STEERING LINES FROM ACTUA–
TOR
HINT: Turn the steering wheel clockwise until it locks
before disconnecting the PS lines. And if you cannot
work from the upper side, work from the wheel house.
(a) Remove the two union bolts and disconnect the two
power steering pressure tubes.
(b) (22R–E Engine)
Disconnect the power steering line hose.
(c) (3VZ–E Engine)
Disconnect the two power steering line hoses.
5. REMOVE PS TUBE CLAMP INSTALLATION BOLT
Remove the installation bolt of the power steering tube
clamp.
6. REMOVE ACTUATOR
Remove the three bolts and remove the actuator from the
wheel house.
7. REMOVE BRACKET FROM ACTUATOR
Remove the three bolts and separate the actuator and
bracket.
BR–91