STEERING
–
Manual Gear Housing (4WD)
3. CONNECT PITMAN ARM TO GEAR HOUSING
Align alignment marks on the pitman arm and the sector
shaft, and install the spring washer and nut.
Torque: 177 N–m (1,800 kgf–cm, 130 ft–lbf )
4. DISCONNECT PITMAN ARM FROM RELAY ROD
(a) Remove the cotter pin and set nut.
(b) Using SST, disconnect the pitman arm from the re–
lay rod.
SST 09611–22012
COMPONENTS
SR–27