AUTOMATIC TRANSMISSION
5. REMOVE OIL TUBE
Pry up both tube ends with a large screwdriver and re–
move the tube.
6. REMOVE SOLENOID WIRING
(a) Disconnect the three connectors from No.1, No.2
(b) Remove the stopper plate from the case.
(c) Pull out the solenoid wiring from the transmission
(d) Remove the O–ring from the grommet.
7. REMOVE VALVE BODY
(a) Remove the sixteen bolts.
(b) Disconnect the throttle cable from the cam and re–
INSTALLATION OF VALVE BODY
1. CONNECT THROTTLE CABLE TO CAM
Push the cable fitting into the cam.
–
On–Vehicle Repair
and lock–up solenoids.
case.
move the valve body.
AT–205