Toyota Hilux Surf 1993 Owner's Manual page 156

MANUAL TRANSMISSION –
(b) Using SST, remove the rear bearing, spacer, 5th gear
and bearing.
SST 09213–36020
NOTICE: Be careful not to catch the output shaft rear
bearing roller on the counter 5th gear.
(c) Remove the spacer.
15. REMOVE SYNCHRONIZER RING ASSEMBLY WITH
NO.3 HUB SLEEVE AND NO.3 CLUTCH HUB
(a) Remove the synchronizer ring assembly with No.3
hub sleeve from the No.3 clutch hub.
(b) Remove the spacer.
(c) Using two screwdrivers and a hammer, tap out the
snap ring.
(d) Using SST, remove the No.3 clutch hub.
SST 09213–36020
16. REMOVE REAR MAGNET
COMPONENT PARTS REMOVAL
MT2–19