Table of Contents
Advertisement
SUSPENSION AND AXLE
–
(d) Remove the steel ball, spring and seal from the con–
trol handle.
INSPECTION OF FREE WHEELING HUB
1. INSPECT COVER, HANDLE AND SEAL
Temporarily install the handle in the cover and check that
the handle moves smoothly and freely.
ASSEMBLY OF FREE WHEELING HUB
1. APPLY MP GREASE TO SLIDING SURFACE OF PARTS
2. INSTALL CONTROL HANDLE TO COVER
(a) Install the seal, spring and steel ball to the handle.
(b) Install the handle in the cover and install the snap
ring with snap ring pliers.
Free Wheeling Hub
SA–31
Advertisement
Table of Contents
Troubleshooting
