AT–202
AUTOMATIC TRANSMISSION
3. L POSITION TEST
(a) While running in the L position, check to see that
(b) While running in the L position, release the accel-
EVALUATION
If there is no engine braking effect:
• First and reverse brake is defective
4. R POSITION TEST
Shift into the R position and, while starting at wide open
throttle, check for slipping.
5. P POSITION TEST
Stop the vehicle on a gradient (more than 50) and after
shifting into the P position, release the parking brake.
Then check to see that the parking lock pawl holds the
vehicle in place.
–
Troubleshooting (Mechanical System Tests)
there is no up–shift to 2nd gear.
erator pedal and check the engine braking effect.
(c) Check for abnormal noise during acceleration and
deceleration.