Toyota Hilux Surf 1993 Owner's Manual page 357

AT–160
AUTOMATIC TRANSMISSION
(Cont'd)
(MAIN POINT OF INSTALLATION)
1. CHECK TORQUE CONVERTER CLUTCH INSTALLATION
Using calipers and a straight edge, measure from the in–
stalled surface of the torque converter clutch to the front
surface of the transmission housing.
Correct distance: 18.0 mm (0.709 in.)
If the distance is less than the standard, check for an im–
proper installation.
2. ADJUST TRANSMISSION THROTTLE CABLE
(See page AT–116)
3. FILL TRANSMISSION WITH ATF AND CHECK FLUID
LEVEL
Fluid type: ATF DEXRONE II
NOTICE: Do not overfill.
– Removal and Installation of Transmission