Inspection And Replacement Of Steering Column - Toyota Hilux Surf 1993 Owner's Manual

STEERING – Steering Column (Tilt Steering Column)
INSPECTION AND REPLACEMENT OF
STEERING COLUMN
1. INSPECT KEY CYLINDER
Check that the steering lock mechanism operates prop–
erly.
2. 1F NECESSARY, REPLACE KEY CYLINDER
(a) Place the ignition key at the ACC position.
(b) Push down the stop key with a thin rod, and pull out
the key cylinder.
(c) Make sure that the ignition key is at the ACC posi–
tion.
(d) Install a new key cylinder.
3. INSPECT KEY INTERLOCK SOLENOID
(See page AT–214)
4. IF NECESSARY, REPLACE KEY INTERLOCK SOLENOID
(a) Remove the two screws.
(b) Remove the solenoid, spring and lock pin.
(e) Install a new solenoid with the spring and lock pin,
and install the two screws.
5. IF NECESSARY, REPLACE MAIN SHAFT BUSHING
(a) Using a screwdriver, remove the bushing.
(b) Align the holes of the tube and the projections of a
new bushing, and install the bushing in the column
tube.
SR–13