Back Window Installation - Toyota Hilux Surf 1993 Owner's Manual

BO–24
BODY – Back Window
INSTALLATION OF BACK WINDOW
1. CLEAN BODY AND GLASS
Using cleaner, wipe off the contact surface of the body
and the glass.
2. CLEAN WEATHERSTRIP
Using cleaner, clean the weatherstrip surface.
3. INSTALL WEATHERSTRIP ON BACK WINDOW
(a) Attach the weatherstrip to the back window.
NOTICE: If the weatherstrip has become hard, it may
develop water leaks. Use a new one if possible.
(b) Apply a working cord along the weatherstrip groove
as shown.
4. INSTALL BACK WINDOW
HINT: Begin installation in the middle of the lower part
of the glass.
(a) Hold the back window in position on the body.
(b) Install the back window by pulling the cord from the
interior, while pushing the outside of the glass with
your open hand.
(c) To snug the back window in place, tap from the out–
side with your open hand.
5. INSPECT FOR LEAKS AND REPAIR
(a) Perform a leak test.
(b) Seal any leak with auto glass sealer.
Part No. 08830–00030 or equivalent