Toyota Hilux Surf 1993 Owner's Manual page 94

MANUAL TRANSMISSION –
17. INSTALL LOCKING BALLS, SPRINGS AND SCREW
PLUGS
(a) Install the four locking balls and four springs.
HINT: Install the short spring into the bottom of the in–
termediate plate.
(b) Apply liquid sealer to the plug threads.
Sealant: Part No. 08833–00080, THREE BOND 1344
LOCTITE 242 or equivalent
(c) Install the screw plugs and torque the screw plugs
with a torx socket wrench.
(Torx socket wrench T40 09042–00020)
Torque: 19 N – m (190 kgf – cm, 14 ft – Ibf )
18. DISMOUNT INTERMEDIATE PLATE FROM VISE
(a) Dismount the intermediate plate from the vise.
(b) Remove the bolts, nuts and plate washers.
19. INSTALL TRANSMISSION CASE
(a) Remove the any packing material and be careful not
to drop oil on the contacting surfaces of the trans–
mission case or intermediate plate.
(b) Apply seal packing to the transmission case as
shown.
Seal packing: Part No. 08826–00090, THREE BOND
1281 or equivalent
HINT: Install the transmission case as soon as the seal
packing is applied.
(c) Stand the intermediate plate as shown.
(d) Install the transmission case to the intermediate
plate as shown.
Assembly of Transmission
MT1–63