Toyota Hilux Surf 1993 Owner's Manual page 543

SUSPENSION AND AXLE –
(c) Apply molybdenum disulphide lithium base grease
to the steering knuckle bushings.
5. INSTALL DUST DEFLECTOR TO STEERING KNUCKLE
Using SST and a hammer, tap in a new dust deflector.
SST 09608–35014 (09608–06020, 09608–06180)
INSTALLATION OF STEERING KNUCKLE
(See page SA–35)
1. INSTALL STEERING KNUCKLE
(a) Apply molybdenum disulphide lithium base grease
to the drive shaft.
(b) Push the lower suspension arm down and install the
steering knuckle.
(c) Connect the lower ball joint to the steering knuckle
and install and torque the four bolts.
Torque: 58 N–m (590 kgf–cm, 43 ft–Ibf )
Front Axle Hub and Steering Knuckle (Steering Knuckle)
SA–43