Toyota Hilux Surf 1993 Owner's Manual page 604

SA–104
SUSPENSION AND AXLE –
23. INSTAL LH SIDE GEAR SHAFT TO DIFFERENTIAL
CARRIER
(a) Remove any packing material and be careful not to
get oil on the contacting surfaces of the differential
carrier and clutch case.
(b) Apply seal packing to the differential carrier as
shown.
Seal packing: Part No. 08826–00090, THREE BOND
HINT: Install the side gear shaft within ten minutes af–
ter applying seal packing.
(c) Install LH side gear shaft to the differential carrier.
W Tighten the four torx bolts.
Torque: 78 N–m (800 kgf–cm, 58 ft–lbf)
Torx wrench: E14 (Part No. 09044–00010 or locally
manufactured tool)
24. INSTALL DIFFERENTIAL CARRIER COVER
(a) Remove any packing material and be careful not to
drop oil on the contacting surface of the differential
carrier or carrier cover.
(b) Apply seal packing to the carrier cover.
Seal packing: Part No. 08826–00090, THREE BOND
HINT: Install the carrier cover within ten minutes after
applying seal packing.
(c) Install and torque the bolts.
Torque: 47 N–m (475 kgf–cm, 34 ft–lbf)
25. INSTALL ACTUATOR
(a) Remove any packing material and be careful not to
get oil on the contacting surfaces of the actuator
and clutch case.
(b) Apply seal packing to the clutch case as shown.
Seal packing: Part No. 08826–00090, THREE BOND
HINT: Install the actuator within ten minutes after ap–
plying seal packing.
Front Differential (Disassembly and Assembly of
Differential w/ A D D )
1281 or equivalent
1281 or equivalent
1281 or equivalent