Table of Contents
Advertisement
AUTOMATIC TRANSMISSION
Throttle Cable
REMOVAL OF THROTTLE CABLE
1. DISCONNECT THROTTLE CABLE FROM THROTTLE
LINKAGE
2. DRAIN TRANSMISSION FLUID
Remove the drain plug and drain the fluid into a suitable
container.
3. REMOVE FRONT STABILIZER BAR
(See page SA–123)
4. REMOVE FRONT PROPELLER SHAFT
(See page PR–4)
5. REMOVE TRANSMISSION OIL PAN
(a) Remove the nineteen bolts.
1bf Insert the blade of SST between the transmission
case and oil pan, cut off applied sealer.
SST 09032–00100
6. DISCONNECT SOLENOID CONNECTOR
7. DISCONNECT THROTTLE CABLE FROM VALVE BODY
–
On–Vehicle Repair
NOTICE: Be careful not to damage the oil pan
flange.
(c) Remove pan by lifting the transmission case.
AT–155
Advertisement
Table of Contents
Troubleshooting
