Toyota Hilux Surf 1993 Owner's Manual page 173

MT2–36
MANUAL TRANSMISSION –
6. INSPECT CLEARANCE OF SHIFT FORKS AND HUB
SLEEVES
Using a feeler gauge, measure the clearance between
the hub sleeve and shift fork.
Maximum clearance:
1.0 mm (0.039 in.)
If the clearance exceeds the maximum, replace the
shift fork or hub sleeve.
BEARING REPLACEMENT
1. IF NECESSARY, REPLACE COUNTER GEAR FRONT
BEARING AND SIDE RACE
(a) Using snap ring pliers, remove the snap ring.
(b) Using SST, press out the bearing.
SST 09950–00020
(c) Check the side race for wear or damage.
(d) If necessary, remove the side race.
Using SST and socket wrench, remove the side race.
SST 09950–20017
(e) Using a socket wrench, press in a new bearing, side
race and inner race.
COUNTER GEAR AND REVERSE IDLER GEAR