BR–10
BRAKE SYSTEM
–
Master Cylinder
MASTER CYLINDER
REMOVAL OF MASTER CYLINDER
1. DISCONNECT LEVEL WARNING SWITCH CONNECTOR
2. DRAW OUT FLUID WITH SYRINGE
NOTICE: Do not let brake fluid remain on a painted sur–
face. Wash it off immediately.
3. DISCONNECT BRAKE TUBES
Using SST, disconnect the brake tubes from the master
cylinder.
SST 09751–36011
4. REMOVE MASTER CYLINDER
(a) Remove the four nuts and 3–way union.
(b) Remove the clamp.
(c) Remove the master cylinder and gasket from the
brake booster.