Toyota Hilux Surf 1993 Owner's Manual page 422

TF–10
TRANSFER – Disassembly of Transfer
12. REMOVE SHIFT NO. 1 FORK AND CLUTCH SLEEVE
(a) Shift the fork shafts to the high–low position.
(b) Using a pin punch and a hammer, drive out the slot–
ted spring pin.
(c) Remove the shift No. 1 fork together with the clutch
sleeve.
13. REMOVE CLUTCH HUB AND TRANSFER DRIVE
GEAR
Using SST, remove clutch hub and transfer drive gear.
SST 09950–20017
14. REMOVE NEEDLE ROLLER BEARING, NO.2 SPACER
AND STEEL BALL
15. REMOVE TRANSFER CASE COVER
Remove the four bolts and remove the transfer case
cover and gasket.
16. REMOVE STRAIGHT SCREW PLUGS, SPRINGS AND
LOCKING BALLS
(a) Using SST, remove the plug on the right side.
SST 09313–30021
(b) Using a magnetic finger, remove the spring and ball.
(c) Remove the plug, spring and ball on the left side in
the same procedure.