Brake Actuator Components View; Brake Actuator Inspection - Toyota Hilux Surf 1993 Owner's Manual

BRAKE SYSTEM – Rear–Wheel Anti–Lock Brake System
Brake Actuator
COMPONENTS
INSPECTION OF BRAKE ACTUATOR
1. CHECK BRAKE FLUID PRESSURE
(a) Remove the bleeder plug from the rear wheel cylin–
der and connect SST.
SST 09709–29017
(b) Bleed the air from SST.
(c) With the engine off, hold the brake pedal depressed
for about 10 seconds with the pressure at 1,961
kPa (20 kgf/crn
no change in the pedal reserve distance.
If there is a change in the brake pedal reserve distance,
check the brake line, master cylinder and wheel cylin-
der for fluid leakage.
2
, 284 psi ), and check that there is
BR–87