Differential Inspection And Replacement - Toyota Hilux Surf 1993 Owner's Manual

SA–70
SUSPENSION AND AXLE –
(c) Using SST and a hammer, remove the two side
bearing preload adjusting plate washers.
SST 09504–22011
HINT: Measure the adjusting plate washer and note
the thickness.
(d) Remove the differential case with bearing outer race
from the carrier.
HINT: Tag the bearing outer races to show the location
for reassembly.
15. REMOVE DRIVE PINION FROM DIFFERENTIAL CAR-
RIER
INSPECTION AND REPLACEMENT OF
DIFFERENTIAL
1. REPLACE DRIVE PINION FRONT BEARING
4ay Using SST, press out the front bearing from the
drive pinion.
SST 09950–00020
HINT: If the drive pinion or ring gear are damaged, re–
place them as a set.
(b) Install the washer on the drive pinion.
(c) Using SST, press in the front bearing onto the drive
pinion.
SST 09506–30012
2. REPLACE DRIVE PINION FRONT AND REAR BEARING
OUTER RACES
(a) Using a brass bar and hammer, drive out the outer
race.
(b) Using SST, drive in a new outer race.
SST 09608–35014
Front outer race (09608–06020, 09608–06120)
Rear outer race (09608–06020, 09608–06110)
Front Differential (Disassembly and Assembly of
Differential w/o A D D )