AT–30
AUTOMATIC TRANSMISSION
5.
INSTALL PAN WITH NEW GASKET
Be sure the pan is clean and the two magnets are in
place.
NOTICE: Do not use gasket sealer.
Tighten the bolts evenly.
Torque: 5.4 N–m (55 kgf–cm, 48 in.¿lbf)
6.
INSTALL DRAIN PLUG
Torque the drain plug.
Torque: 20 N–m (205 kgf–cm, 15 ft–lbf)
7.
FILL TRANSMISSION WITH ATF
Add only about two liters of ATF. Start the engine and
shift through all the positions. Check the fluid level and
add as necessary.
NOTICE: Do not overfill.
Fluid type: ATF DEXRON II
–
On–Vehicle Repair