BODY ELECTRICAL SYSTEM
2. INSPECT MOTOR
(Operation at Low Speed)
Connect the positive (+) lead from the battery to termi–
nal 2 and the negative (–) lead to the motor body, check
that the motor operates at low speed.
If operation is not as specified, replace the motor.
(Operation at High Speed)
Connect the positive (+) lead from the battery to termi–
nal 1 and the negative (–) lead to the motor body, check
that the motor operates at high speed.
If operation is not as specified, replace the motor.
(Operation, Stopping at Stop Position)
(a) Operate the motor at low speed and stop the motor
(b) Connect terminals 2 and 3.
(c) Connect the positive (+) lead from the battery to
–
Wiper and Washer System
operation anywhere except at the stop position by
disconnecting positive (+) lead from terminal 2.
terminal 4 and the negative (–) lead to the motor
body, check that the motor stops running at the
stop position after the motor operates again.
If operation is not as specified, replace the motor.
BE–27