Toyota Hilux Surf 1993 Owner's Manual page 132

MT1–102
MANUAL TRANSMISSION –
25. INSTALL SET BOLTS
Install and torque the three bolts.
Torque: 20 N–m (200 kgf–cm, 14 ft–lbf)
26. INSTALL LOCKING BALLS, SPRINGS AND SCREW
PLUGS
(a) Apply liquid sealer to the plug threads.
(b) Install the four locking balls, springs and screw
(c) Using a torx socket wrench, torque the screw plugs.
Torque: 19 N – m (190 kgf – cm, 14 ft – Ibf )
27. INSTALL MAGNET TO INTERMEDIATE PLATE
28. DISMOUNT INTERMEDIATE PLATE FROM VISE
(a) Dismount the intermediate plate from the vise.
(b) Remove the bolts, nuts and plate washers.
29. INSTALL TRANSMISSION CASE
(a) Remove the any packing material and be careful not
to drop oil on the contacting surfaces of the interme–
diate plate or transmission case.
(b) Apply seal packing to the transmission case as
shown.
Seal packing: Part No. 08826–00090, THREE BOND
1281 or equivalent
Assembly of Transmission
Sealant: Part No. 08833–00080, THREE BOND 1344,
LOCTITE 242 or equivalent
plugs.
(Torx socket wrench T40 09042–00020)