Disassembly Of Rear Axle Hub; Rear Axle Hub Inspection And Repair - Toyota Hilux Surf 1993 Owner's Manual

SUSPENSION AND AXLE –

DISASSEMBLY OF REAR AXLE HUB

1. REMOVE REAR WHEEL AND REAR AXLE SHAFT
(See page
2. REMOVE BEARING LOCK NUT
(a) Remove the two bolts from the bearing lock nut.
(b) Using SST, remove the bearing lock nut.
SST 09509–25011
(c) Remove the bearing lock plate.
3. REMOVE AXLE HUB FROM AXLE
4. REMOVE OIL SEAL AND INNER BEARING
(a) Using SST, remove the oil seal from the axle hub.
SST 09308–00010
(b) Remove the inner bearing from the axle hub.
INSPECTION AND REPAIR OF REAR AXLE HUB
1. INSPECT AXLE HOUSING
Using a magnetic flaw detector or flaw detecting pene–
trant, check for damage or cracks.
2. REPLACE BEARING OUTER RACE
(a) Using a hammer and brass bar, drive out the outer
race.
Rear Axle Shaft and Axle Hub (Double Tire)
SA–127 )
SA–129