Toyota Hilux Surf 1993 Owner's Manual page 126

MT1–96
MANUAL TRANSMISSION –
5. INSTALL REVERSE SHIFT ARM TO REVERSE SHIFT ARM
BRACKET
Install the reverse shift arm to the pivot of the reverse
shift arm bracket.
6. INSTALL REVERSE IDLER GEAR AND SHAFT
Align the reverse shift arm shoe to the reverse idler gear
groove and insert the reverse idler gear shaft to the inter–
mediate plate.
7. INSTALL REAR BEARING RETAINER
(a) Align the rear bearing retainer to the reverse idler
gear shaft groove.
(b) Install and torque the bolts.
Torque: 18 N–m (185 kgf–cm, 13 ft–lbf)
8. INSTALL BALL AND THRUST WASHER
9. INSTALL COUNTER FIFTH GEAR WITH NO.3 HUB
SLEEVE ASSEMBLY AND NEEDLE ROLLER BEAR-
INGS
(a) Apply gear oil to the needle roller bearings.
(b) Install the counter 5th gear with No.3 hub sleeve
and needle roller bearings.
Assembly of Transmission