Toyota Hilux Surf 1993 Owner's Manual page 90

MANUAL TRANSMISSION –
10. INSTALL SNAP RING
(a) Select snap ring that will allow minimum axial play.
Mark
(b) Using a brass bar and hammer, install the snap ring.
11. MEASURE COUNTER FIFTH GEAR THRUST CLEAR-
ANCE
Using a feeler gauge, measure the counter 5th gear
thrust clearance.
Standard clearance:
Maximum clearance: 0.30 mm (0.0118 in.)
12. INSTALL SHIFT FORK SHAFT NO.2 AND SHIFT FORK
NO.2
(a) Install the shift fork No. 1 and No. 2.
(b) Install the shift fork shaft No.2 through the interme–
diate plate and shift forks.
(c) Install the shift fork No.2 set bolt and torque the
bolt.
Torque: 20 N–m (200 kgf –cm, 14 ft–lbf)
Assembly of Transmission
Thickness mm (in.)
0.10 – 0.30 mm
(0.0039 – 0.0118 in.)
MT1–59