MT1–36
MANUAL TRANSMISSION
–
23. REMOVE REAR BEARING RETAINER
Using a torx socket wrench, remove the four bolts.
(Torx socket wrench T40 09042–00020)
24. REMOVE COUNTER GEAR
(a) Using a snap ring expander, remove the counter
gear rear bearing snap ring.
(b) Using SST and 12 mm socket wrench, remove the
counter gear rear bearing.
SST 09602–35011
(c) Remove the counter gear.
25. REMOVE INPUT SHAFT
Remove the input shaft with 13 needle roller bearings
and synchronizer ring from output shaft.
26. REMOVE OUTPUT SHAFT
(a) Using a snap ring expander, remove the output shaft
center bearing snap ring.
Disassembly of Transmission