Windshield Moulding Installation - Toyota Hilux Surf 1993 Owner's Manual

BODY – Moulding
INSTALLATION OF WINDSHIELD MOULDING
1. INSTALL CLIP INTO MOULDING
(See page BO–13)
Install the clip to the appropriate place on the moulding.
2. APPLY ADHESIVE AT CLIP INSTALLATION AREA
(a) Cut out the old adhesive around the clip installation
area.
NOTICE: Do not damage the body and fastener.
(b) Apply adhesive at the clip installation area so water
does not collect there.
3. APPLY ADHESIVE AT UPPER MOULDING INSTALLA–
TION AREA
4. INSTALL NEW UPPER MOULDING
Place the moulding onto the body and tap it by hand.
5. INSTALL SIDE MOULDING WITH UPPER JOINT COVERS
(a) Place the moulding with upper joint covers onto the
body.
(b) Tap the moulding by hand to install it.
(c) Pry up the clips on the body side, and install them to
the moulding.
6. INSTALL LOWER MOULDING WITH LOWER JOINT
COVERS
(a) Place the moulding with lower joint covers onto the
body.
(b) Align the clips of the moulding with the body holes,
and push the moulding on the body.
7. INSTALL COWL LOUVER AND WEATHERSTRIP
(See page BO–13)
8. INSTALL WIPER ARMS
(See page BO–13)
BO–15