Power Steering Pump Assembly - Toyota Hilux Surf 1993 Owner's Manual

SR–52
STEERING – Power Steering (Power Steering Pump)
ASSEMBLY OF POWER STEERING PUMP
(See page SR–47)
1. COAT ALL SLIDING SURFACES WITH POWER
STEERING FLUID BEFORE ASSEMBLY
2. INSTALL ADJUSTING STAY
Install the adjusting stay and torque the two bolts.
Torque: 41 N–m (420 kgf–cm, 30 ft–lbf)
3. INSTALL FRONT PLATE AND ROTOR TO PUMP SHAFT
(a) Install the shorter straight pin to the front plate.
(b) Install two new O–rings to the front plate.
(c) Install the front plate to the pump shaft.
(d) Install the rotor to the pump shaft with the inscribed
mark facing outward.
(e) Install the snap ring.
4. INSTALL PUMP SHAFT TO FRONT HOUSING
(a) Coat the oil seal lip with MP grease.
(b) Install the longer straight pin to the front housing.