PR–12
PROPELLER SHAFT
–
PROPELLER SHAFT
(DANA type)
Color
Blue
Yellow
Silver
Copper
Black
Red
Green
(b) Using a hammer, tap the yoke until there is no clear–
ance between the bearing outer race and snap ring.
7. CHECK SPIDER BEARING
(a) Check that the spider bearing moves smoothly.
(b) Check the spider bearing axial play.
Bearing axial play:
Less than 0.05 mm (0.020 in.)
HINT: Install new spider bearings on the shaft side in
the procedure described above.
Thickness
mm (in.)