Toyota Hilux Surf 1993 Owner's Manual page 640

SA–140
SUSPENSION AND AXLE –
13. REPLACE DRIVE PINION FRONT AND REAR BEARING
OUTER RACES
(a) Using a hammer and brass bar, drive out the outer
race.
(b) Using a press and SST, drive in a new outer race.
SST
Front side 09608–35014 (09608–06020, 09608–06110)
Rear side
8 in. 4 pinion type
Others 09608–35014 (09608–06020, 09608–06120)
14. REMOVE SIDE BEARINGS FROM DIFFERENTIAL CASE
Using SST, pull the side bearing from the differential
case.
SST 09950–20017
HINT: Fix the claws of SST to the notches in the differ–
ential case.
15. REMOVE RING GEAR
(a) Remove the ring gear set bolts and lock plates.
(b) Place alignment marks on the ring gear and differen–
tial case.
(c) Using plastic or copper hammer, tap on the ring gear
to separate it from the differential case.
Differential
09608–35014 (09608–06020, 09608–06180)