SA–8
SUSPENSION AND AXLE
–
(c) Mark on the adjustment chart the alignment values
measured at the non–loaded vehicle height.
Example: Camber 1E 00'
Caster 2E 30'
(d) As shown in the illustration, read the distance from
the standard value to the measured value, and ad–
just the front and/or rear adjusting cams accord–
ingly.
Example: Front cam + 3.4
Rear cam –1.6
(e) Torque the front and/or rear cam nuts.
Torque: 196 N–m (2,000 kgf–cm, 145 ft–lbf)
Wheel Alignment (4WD)