Front Drive Shaft Assembly - Toyota Hilux Surf 1993 Owner's Manual

SA–48
SUSPENSION AND AXLE –
(c) Using a brass bar and hammer, remove the tripod
joint from the drive shaft.
5. REMOVE INBOARD JOINT BOOT
6. REMOVE OUTBOARD JOINT BOOT CLAMPS AND BOOT
NOTICE: Do not disassemble the outboard joint.
7. REMOVE DUST DEFLECTOR
Using a screwdriver and hammer, remove the dust de–
flector.
ASSEMBLY OF FRONT DRIVE SHAFT
(See page SA–46)
1. INSTALL DUST DEFLECTOR
Using a hammer and screwdriver, install a new dust de–
flector.
Front Drive Shaft