Disassembly Of Steering Column - Toyota Hilux Surf 1993 Owner's Manual

SR–10
STEERING – Steering Column (Tilt Steering Column)

DISASSEMBLY OF STEERING COLUMN

(See page SR–9)
1. REMOVE UPPER BRACKET
(a) Using a centering punch, mark the center of the
tapered–head bolt.
(b) Using a 3 – 4 mm (0. 12 – 0.16 in.) drill, drill into
the tapered–head bolt.
(c) Using a screw extractor, remove the tapered–head
bolt.
(d) Remove the two bolts, and separate the upper
bracket and the column tube.
2. REMOVE COMPRESSION SPRING AND TENSION
SPRING
(a) Remove the bolt with the compression spring.
(b) Remove the bushings from the spring.
3. REMOVE THREE TENSION SPRINGS
4. REMOVE TWO TILT LEVER RETAINERS
(a) Remove the E–rings from the retainers.
(b) Remove the retainers with the nuts.
5. REMOVE TWO PAWL STOPPERS