Toyota Hilux Surf 1993 Owner's Manual page 953

BO–10
BODY – Front Door
3. INSTALL OUTSIDE HANDLE WITH LOCK CYLINDER
AND DOOR LOCK
(a) Install the lock cylinder with the snap ring to the out–
side handle.
(b) Install the outside handle and lock cylinder with two
bolts.
(c) (w/Power Door Lock)
Install the door lock and motor with three screws
and the bolt, then connect the connector.
(w/o Power Door Lock)
Install the door lock with three screws.
(d) Connect the links to the outside handle.
4. INSTALL INSIDE LOCKING KNOB
Install the locking knob and connect the control links.
5. INSTALL GLASS RUN
6. INSTALL REAR LOWER FRAME
7–1. (w/o Ventilator Window)
INSTALL FRONT LOWER FRAME
7–2. (w/Ventilator Window)
INSTALL VENTILATOR WINDOW
(a) Install the ventilator window.
(b) Install the bolt and two screws.
8. (w/o Ventilator Window)
ADJUST DOOR GLASS
Adjust the equalizer arm up or down and tighten if where–
dimensions A and B, as shown are equal.
9. INSTALL REAR VIEW MIRROR
10. INSTALL INNER AND OUTER COVERS
11. INSTALL SERVICE HOLE COVER
(a) Seal the service hole cover with adhesive.
(b) Install the lower edge of the service hole cover into
the panel slit.