Toyota Hilux Surf 1993 Owner's Manual page 157

MT2–20
MANUAL TRANSMISSION –
17. REMOVE OUTPUT SHAFT REAR BEARING AND
FIFTH GEAR
(a) Using two screwdrivers and a hammer, tap out the
snap ring.
(b) Using SST, remove the rear bearing and 5th gear.
SST 09312–20011 (09313–00030, 09313–00040,
09313–00050)
18. REMOVE REVERSE GEAR
(a) Using a snap ring expander, remove the snap ring.
(b) Using SST, remove the reverse gear.
SST 09950–20017
19. REMOVE CENTER BEARING RETAINER
(a) Using a torx socket wrench, unscrew the torx screws
and remove the retainer.
Torx wrench T40 09042–00020
COMPONENT PARTS REMOVAL