Toyota Hilux Surf 1993 Owner's Manual page 65

MT1–34
MANUAL TRANSMISSION –
(b) Remove the shift fork No. 1 set bolt.
(c) Remove the shift fork shaft No. 1.
(d) Remove the interlock pin No. 1.
(e) Remove the shift fork No. 2 set bolt.
(f) Remove the shift fork No.1, No.2 and shift fork
18. INSPECT COUNTER FIFTH GEAR THRUST CLEARANCE
Using a feeler gauge, measure the counter 5th gear
thrust clearance.
Standard clearance:
Maximum clearance: 0.30 mm (0.0118 in.)
19. REMOVE GEAR SPLINE PIECE NO.5, SYNCHRONIZER
RING, NEEDLE ROLLER BEARINGS AND COUNTER
FIFTH GEAR WITH HUB SLEEVE NO.3
(a) Using two screwdrivers and a hammer, tap out the
snap ring.
Disassembly of Transmission
shaft No.2.
0.10 – 0.30 mm
(0.0039 – 0.0118 in.)