Toyota Hilux Surf 1993 Owner's Manual page 42

MANUAL TRANSMISSION –
(c) Install the engine rear mounting bracket to the sup–
port member. Torque the bolts.
Torque: 59 N – m ( 590 kgf – cm, 43 ft – Ibf)
(d) Lower the transmission and rest it on the extension
housing.
(e) Install the bracket to the mounting. Torque the
bolts.
Torque: 29 N – m (300 kgf – cm, 22 ft – Ibf )
4. REMOVE PIECE OF WOOD FROM FRONT
CROSSMEMBER
5.–1(22R–E)
INSTALL EXHAUST PIPE, BRACKET AND CLAMP
(a) Install the exhaust pipe to the manifold.
Torque: 62 N – m ( 630 kgf – cm, 46 ft – Ibf )
(b) Install the pipe bracket to the clutch housing.
Torque: Upper 19 N – m (195 kgf – cm, 14 ft– Ibf )
Lower 69 N – m (700 kgf – cm, 51 ft – Ibf )
(c) Install the exhaust pipe clamp.
5.–2 (3VZ–E)
INSTALL EXHAUST PIPE, BRACKET AND CLAMP
(a) Install the exhaust pipe to the manifold.
Torque: 62 N – m (630 kgf – cm, 46 ft – Ibf)
(b) Connect exhaust pipe to catalytic converter front
side.
Torque: 39 N – m (400 kgf – cm, 29 ft – Ibf )
(c) Install the pipe bracket to the clutch housing.
Torque: 39 N–m (400 kgf–cm, 29 ft–lbf )
(d) Install the exhaust pipe clamp.
Installation of Transmission
MT1–11