Toyota Hilux Surf 1993 Owner's Manual page 450

TF–38
TRANSFER – Disassembly of Transfer
(d) Using a magnetic finger, remove the straight pin.
14. REMOVE HIGH AND LOW FORK SHAFT, FORK AND
STOPPER
15. REMOVE REAR OUTPUT SHAFT, DRIVEN SPROCKET
AND CHAIN
(a) Using snap ring pliers, remove the snap ring.
(b) Mount the rear case in the vise.
NOTICE: Be careful not to damage the sealing surface.
(c) Using a plastic hammer, tap the rear case with pull–
ing the rear output shaft and driven sprocket.
(d) Remove the chain.